iRig PRE 2 är kanske det enklaste sättet att ta med dig studiokvalitét vart du än går. Oavsett om du är musiker, fotograf eller mediakreatör kommer iRig PRE 2 att göra ditt liv lättare. I det kompakta bygget kan du koppla in professionella mikrofoner samt ansluta till iOS- och Androidenheter och även DSLR-kameror, monitorlyssna utan fördröjning iRig PRE 2 drivs av 2st AA-batterier som också aktiverar den inbyggda fantommatningen (riktig +48V). Spela in din kreativa resa med 24-bit/96kHz-upplösning!
Specifikationer:
Key Features
- For iPhone, iPad, Android and digital cameras
- Built-in XLR connector for microphones
- Adjustable gain control
- +48 V phantom power
- 50 Hz to 20 kHz frequency response
- Headphone output with direct monitoring
- Attached 40cm (15.75″) TRRS cable
- Auto-sensing 3.5mm output
- Powered by 2xAA batteries
- On/Off switch
- Compatible with all your favorite apps
Technical Specifications
- Frequency response: from 50 Hz to 20 KHz
- EIN (@gain min): -113.5 dBA
- EIN (@ gain max): -92.4dBA
- THD+N: -90 dBA / 0,003%
- Gain range: 48dB
- Phantom max current: 6mA
- Battery duration (Alkaline 2xAA): approx 20 hours when phantom is off, approx 7 hours when phantom is on
Includes
- iRig Pre 2
- 2xAA batteries
- Velcro strip
- Free apps for iOS and Android
Dimensions
- Size: 40mm/1.57″ x 110mm/4.33″ x 34mm/1.34″
- Weight: 75g/2.65oz (batteries excluded)
- Cables length: 40cm/15.75″
Compatibility
iOS and Android Devices
Compatible with iPhone, iPad, iPod touch and Android devices with 1/8″ / 3.5mm jack standard headset input (onboard or via adaptor) compliant with the CTIA/AHJ wiring standard, which is illustrated as follows.
DSLR Cameras
Compatible with most DSLR cameras equipped with 1/8″ / 3.5mm jack microphone input.
Recensioner
Det finns inga recensioner än.